Amostra 10m Nylon PA para Testes e Feedback (Cor/Material/Marca Surpresa)

Esta é uma amostra de Nylon de aproximadamente 10m para testes e feedback.
Cor, material e marca vão variar e dependem da altura.

Limitada ao stock existente.

Prepare gcode for printing

Parameter Value
Nozzle Temperature 255ºC-270ºC
Bed Temperature 65ºC-75ºC
Cooling fan Always on
Infill 15-20%
Bridge Flow Ratio 0,35-0,4

Ideal parameters for 3D printing

Parameter Value
Nozzle Temperature 255
Bed Temperature 70ºC
Cooling fan Always on
Infill 15%
Bridge Flow Ratio 0,35
Max speed 50 mm/s
First Layer Speed 7 mm/s
Infill speed 30 mm/s

The reason of the parameters

• According to our research, decreasing the speed at which the parts
are printed has a positive effect on the overall strength of the parts.
Therefore C&S advises to use lower printing speeds, to have the
highest strength possible in the printed componentes.

Printer Preparation

• It is advised to use glue in the bed when printing the parts.

Preparing the filament

• The filament should be stored in na environment with low
possibilities that the filament absorbs humidity, given the fact that
the humidity decreases the quality of the filament and its properties.